Filterpro

POWER UP SAE 5W-30 MUSCLE TECH SN/CJ-4

Power Up

$15.53

incl GST

Part No. PU-MT3005 Alt Part No. PU-MT3005 Unit: Each

POWER UP 5W-30 SN/CJ-4 FULLY SYNTHETIC is a leading Premium Petrol & Diesel Engine Oil with MAS formula is a premium engine oil with MAS Formula (Metal Treatment, Additives & Synthetic) provides exceptional protection against engine wear of the premium petrol and diesel engine. The metal treatment will penetrate into a micro-pore of the metal surface to form a tough low friction shield to protect metal from wear approx. 4-5 times as compared to other engine oils. Ranging from our exceptional high-quality top of the range oils to cost effective dependable choices. POWER UP 5W-30 SN/CJ-4 FULLY SYNTHETIC has the oils to keep your VEHICLE on the road. State of art technology formulation specially designed to meet the requirements of Euro 4 and Euro 5 compliant heavy-duty diesel engines. Its higher viscosity index helps to provide better protection during start up as oil is able to reach all parts at shortest time possible. It provides high durability of protection and oil life which offers additional benefits to operators of the vehicles fitted with exhaust particulate filters. Higher base number of the products neutralize acidic materials created during fuel combustion resulting in better protection from corrosion & reduction in sludge.

  • Reduces wear 4 to 5 times
  • Highly recommended for Petrol or Diesel engines.
  • New formulation for improved protection for Euro 3, Euro 4 (ACEA E7) & Euro 5 engines.
  • Exceeds latest industry & OME standards (API SN/CJ-4).
  • Suitable choice for long-haul and mixed vehicle fleets.
  • Higher TBN reduces acid formation, corrosion and sludge which causes components corrosion & wear.
  • Reduces combustion acids from the use of exhaust gas recirculation which results in corrosion & short oil life
  • Superior anti-foam performance important for engine oil use as hydraulic fluid in the fuel injection engine
  • Ensuring high level of protection requiring low emission and severe duty engines

Properties

Method

Unit

Results

Density @ 15°C

ASTM D 4052

kg/m³

0.852

Viscosity @ 40°C

ASTM D 445

mm²/s

62.3

Viscosity @ 100°C

ASTM D 445

mm²/s

10.6

Viscosity Index

ASTM D 2270

-

160

Flash point (COC)

ASTM D 92

°C

214

Pour point  

ASTM D 97

°C

-36

Total Base Number

ASTM D 2896

mg KOH/g

7.8

 Approvals & Recommendations:API SN/CJ-4, ACEA A3/B3, VW 500, CCMC G-5/PD-2/D-5.